How to clean the surface of the irons ? Marzou

Iron 

Iron is a home appliance that is used to remove the wrinkles in the cloth through high pressure and heat. Ironing was a long time ago for the rich who are able to employ the servants as it is a difficult and tedious process. The iron working principle dates back to 400 BC. Where the Greeks were using a circular iron band is heated to make folds on their clothes, and began the iron since then evolved and took many forms and heavy weights, while the electric iron, which developed to what it is now.

It was invented by Henry W. Sealy in 1882, and was connected to electricity through wires separate from them can be dismantled and installed, and in 1903, the iron was developed and connected to electric wires, and continued additions to the iron iron increasingly and developed until there are many types and each type of its own characteristics .

The principle of the work of the iron is dependent on the passage of electric current in the inner winding of the current, when the current of electricity is generated heat transferred to the base of the iron and heated and do the work, and the basic types are automatic irons, and non-automatic, and the difference between the two types is that the automatic iron able to Regulate temperatures automatically and not manually.

In order for the iron to work properly, it needs constant maintenance and cleaning, especially if the openings in the base are blocked. [2] The openings are clogged due to water deposits. The soiled iron causes many problems for clothes, Which is very simple.

One knows that it is time to clean the iron if it feels resistant during the ironing process. To clean the whole iron, two basic parts must be cleaned: the water tank that leads to the base; if the tank is not clean it may clog the holes in the base, The other part is the base itself or the surface of the iron, and we will discuss in this article the steps and methods of cleaning the surface of the iron.

Methods of cleaning the surface of the iron 

There are several ways to clean the surface of the iron, including the following:

Cleaning using baking soda:

Mix a tablespoon of water with two tablespoons of baking soda; to form a fairly cohesive paste, preferably distilled water if any. Put the putty on the surface and concentrate on the soiled areas, leaving it for several minutes if the surface is very dirty. Clean the surface of the putty with a cotton cloth dampened with water. Clean the steam holes in the base using cotton chopsticks to clean the ears, and replace them with new ones if they are dirty.

Discharge the water tank if it contains old water filled with fresh water distilled, and for better cleaning can be made a mixture of three quarters of a cup of water and a quarter cup of white vinegar; it must be written in the user manual that vinegar is safe on the iron. Run the iron on the sweetest heat and activate the steam, as the steam will work with the heat to clean the holes in the surface of the iron. Make sure that the cotton cloth is free from dirt, and keep pressing the steam button to get the most out of it, noting that the deposits and dirt on the cloth are brown.

Finally separate the iron from the power supply, leave it cool, and make sure to place it in a safe place after emptying the tank of the remaining water.

Cleaning with salt and vinegar: 

Mix the salt with the vinegar by 2: 1; the amount of vinegar is twice the amount of salt, and put the mixture on medium heat to dissolve the salt while not allowing the vinegar to boil, and then let it cool. Dip a clean cloth with the mixture and wipe the surface of the iron, and a soft brush can be used to do this if the surface of the iron is not coated; the brush can be scratched in the paint. Rinse the surface with water to remove traces of vinegar and salt, and if you notice the presence of some dirt can be repeated the process again.

Connect the irons to the electrical current and clean cloth to remove any residual effects as mentioned in a previous step. Another way to clean the surface is to run the iron at the lowest temperature and scrub the surface with a dry tissue, then raise the heat towel and ironing a clean cloth to get rid of any residual dirt. You can use newspaper papers to remove any adhesive on the surface; by running the iron at a high temperature with the activation of steam, and then passed on a sheet of newspaper papers, and can be sprinkled a little salt on the paper before passing the iron above it, To get rid of adhesives.

Toothpaste can be used to clean the surface with toothpaste oil on it to be cool, then wipe the paste with a clean, damp cloth.